The TetraPond Bottom Drain is an important accessory for achieving optimal water quality. Installed at the deepest point of the pond, this engineered device encourages debris and waste to flow into a circular collection chamber where it is then carried away underground via standard 3" PVC pipe (not included) to a disposal area away from the pond. It's dome-like shape is designed to force debris and waste to flow into a collection area while preventing debris from settling on top of the drain or away from the collecting vents. In seconds, accumulated debris is permanently removed.
| SKU |
Description |
Price |
Shoppingcart |
| BD200 |
Tetra Bottom Drain 2" ..............Free Shipping |
$89.00 |
 |
Photo of a Bottom Drain being installed in the floor of the pond.
Intallin two drains in the pond. Should be 8' to 10' apart. |
Click on Picture of this air pump to go to the Air Pump Page.
Air pump to run Two Rhino Drains or any Bottom Drain with an Air Difuser.
For air drain... the size of the air pump is a function of the depth that the drains are set.
A good rule is "20lpm per meter of depth".
Examples;
1 meter = 3.3' = 20 lpm for one Rhino Drain--Double the depth for Two Rhino Drains.
2 meters = 6.6' = 40 lpm for one Rhino Drain--Double the depth for Two Rhino Drains.
3 meters = 9.9' = 60 lpm for one Rhino Drain--Double the depth for Two Rhino Drains.
4 meters = 13.2' = 80 lpm for one Rhino Drain--Double the depth for Two Rhino Drains.
Now then, if he runs two air drains, you need to double the depth.
For example;
2 drains, each at 2 meters = 4 meters total = 13.2' = 80 lpm
| Tetra Vaccum Bottom Drain |
Tetra Vacuum Bottom Drain 2"
TetraPond Vacuum drain can be installed without cutting the liner. Undo the plug and fill with sand to weight it down. Sits on top of the linner in the deepest part of the pond and connect to 2" flex PVC pipe. Removes debris that settles to the lowest point of the pond from pond bottom.
SKU |
Description |
Price |
Shoppingcart |
16361 |
Tetra Vaccum Drain 2" |
$55.00 |
|
|
